⚠️ Each piece of information below is required to participate in the rebate ⚠️
1. Photograph the Gallons Per Flush (GPF) marking on the OLD toilet.
Each toilet has a manufacturer-stamped GPF rating, usually located on the bowl or tank.
• Toilets with greater than 1.6 GPF = $100
• Toilets with 1.6 GPF or less = $50
2. Photograph the old toilet before removal.
Ensure the surrounding room is visible in the image. This allows DWP to remotely validate the replacement.
3. Photograph the new toilet installed in the same room.
The image should clearly show the new fixture and its location.
4. Provide proof of purchase.
Submit your receipt or invoice showing the make, model, and purchase date of the new toilet(s).
Struggling to find the Gallons Per Flush (GPF)?
Manufacturers typically place this information in one of two locations:
-
Inside the tank:
Remove the tank lid and look along the inside back or side wall. The GPF rating is often printed, stamped, or molded into the tank.
-
On the bowl, near the seat hinge:
Some toilets display the GPF rating on the porcelain surface behind the seat, close to the tank connection.
Still can’t find it? Contact the Conservation Department and we’ll assist to the best of our ability.
